|
|
|
Good water circulation and filtration are fundamental to
a clean and welcoming pool. That is why we only install
the highest specification, corrosion -resistant polymeric
filters, with non-rusting, self-priming pumps to deliver
maximum circulation with minimum maintenance.
Skimmers and inlets in your pool circulate the water to
the filter through highly-durable, single section pipework.
We avoid multiple underground jointing to eliminate potential
leak sources.
|
 |
SKIMMERS
17,5 Lts
FOR CONCRETE POOLS
RECOMMENDED FLOW 5.000 l/h
Made in white ABS, with weir flap and flow regulating plug
Spring loaded mechanism for securing of lid
Telescopic neck allows regulation of lid height to ensure flush fitting
with coping.
Cushioned flap to reduce noise
Interchangeable flap frame support
Basket assembly includes cornea and is fixed positively to avoid floating
American connections are available |
 |
MAIN DRAINS
Wide range adaptable to all applications, with white ABS
plastic or stainless steel grille. All models are available
for concrete and liner pools. Liner pool main drains
are supplied with neoprene seals and stainless steel
screws. |
WALL INLETS
Return inlets to discharge filtered water back to the pool.
Suction inlets for the vacuum cleaner connection.
Made in high resistant ABS material. To fit any kind of
pool. |
|
“ MULTIFLOW” SYSTEM
This new design allows the supply of an eyeball which can be knocked out to the
required diameter (14-20 or 25) by using a tool also supplied to be inserted
into the pre-marked grooves. One eyeball can thus be used to obtain the required
flow Ø 14 = 3.000 lt/h, Ø 20 = 5.000 lt/h, and Ø 25
= 7.000 lt/h. |
| SURFACE
SKIMMER (Concrete) 11306 |
£66.00 |
| SURFACE
SKIMMER (Liner) 11310 |
£105.00 |
| MAIN
DRAIN (Concrete) 00258 |
£19.95 |
| MAIN
DRAIN (Liner) 00270 |
£42.00 |
| INLET
FITTING (Concrete) HD53C |
£7.00 |
| INLET
FITTING (Liner) HD53L |
£12.00 |
| INLET
FITTING (Liner - Stainless Steel) |
£68.00 |
 |
For
use in concrete, liner and concrete shuttered pools
Complete kits include wet niche, flexible conduit, sealed lamp housing
with 300 watt 12 volt bulb
The niche is designed to angle the light beam down 5 degrees to eliminate
pool side glare
Light units available in different cable lengths
Deck
box with a double seal and Micallef cable gland in
order to comply with IP65 protection rating
The transformer has a protection rating of IP65 with variable voltage
output
|
Corrosion
resistant front plate inserts now made of brass/nickel
Micallef style gland inside the niche prevents water entering the conduit
IP68 rated built-in gland on the light housing eliminating the need for
hot melt compounds
Locating lugs and combi housing screws make bulb changing easier
Threaded conduit fitting on back of niche to ease installation
Clip on faceplate on liner light to cover unsightly screws
Easy to secure cover plates to finish concrete pool light |
|
|
|
|
2376
Stratford Road, Hockey Heath, Solihull, West Midlands
B94 6QT
Telephone: 01564 782438, 01564 782804 Fax: 01564 784098 |
|
|
|
